GTI ENGINEERING, INC.

                                                       P.O. BOX 5486 Katy, TX 77491    PH.: 281-398-0004   FAX: 281-398-0007

Caustic and Caustic Rinse Tanks

    The tanks are constructed of 1/4" mild steel plate and are reinforced at the lip with steel channel and at the girth with angle. In addition, the lower portion of the sidewall and the bottom are reinforced with T bar and/or I beam. The tanks are heated by immersion tube burners fabricated of schedule 40 steel pipe and fired with atmospheric type burners. Temperature control of the solution is manual, and the necessary burners are furnished. The stacks extend approximately one foot above the tank lip. After fabrication, the tanks are painted with an epoxy coating suitable for the operating environment.

Acid, Acid Rinse and Flux Tanks

    The tanks are constructed of 1/4" mild steel plate and are reinforced at the lip with steel channel and at the girth with angle. In addition, the lower portion of the sidewall and the bottom are reinforced with T bar and/or I beam.

    The tanks are then lined with 1" welded polypropylene copolymer sheet.  The tank liner bottom is in turn covered with acid brick.  After fabrication, the tanks are painted with an epoxy coating suitable for the operating environment.

Free standing fctanks constructed of structural steel encapsulated with polypropylene sheet are also available.