Where would you like your next plant to be?
GTI can make you become more profitable.
t: 281.398.0004
e. gtiengr@gtiengr.com
Equipment and Parts
Flux and Waste Filters

GTI manufactures 3 sizes of filter presses. 

 

470 mm Filter Press

 

Filter01a.jpg (56161 bytes)Filter plates are 470mm (18") square polypropylene that have a 1 1/4" cake cavity with a capacity of 0.3 cubic feet per chamber. Slurry feed is through the center of the plate, and filtrate is discharged at the four corners of the plate. Filter cloth is polypropylene monofilament rated at 3 CFM. Closure is by a 24" stroke x 3" bore hydraulic cylinder with a capacity of 50 tons. The hydraulic power unit is air driven.

The press framework is fabricated of 1" steel plate, and the closure plates are reinforced with 1" steel ribs. After fabrication, the press is epoxy painted.

The approximate dimensions of the press are:

Capacity             Number                 Length             Width             Height

 

Cubic Feet          of Plates                 Feet                  Feet                Feet

 

    2                            7                          8’                          3’                   5’-6"

    4                           13                        10'                         3’                   5’-6"

A polypropylene air operated diaphragm pump capable of 15 gallons per minute at 60 psig is available. The CPVC piping from the filter to the pump and tank is not included, but will be specified for you.

 

800 mm Filter Press

 

Fluxfil01a.jpg (84672 bytes)Filter plates are 800mm (30") square polypropylene that have a 1 1/4" cake cavity with a capacity of 0.507 cubic feet per chamber. Slurry feed is through the center of the plate, and filtrate is discharged at the four corners of the plate. Filter cloth is polypropylene monofilament rated at 3 CFM. Closure is by a 30" stroke x 8" bore hydraulic cylinder with a capacity of 50 tons. The hydraulic power unit is air driven.

The press framework is fabricated of 1" steel plate, and the closure plates are reinforced with 1" steel ribs. After fabrication, the press is epoxy painted.

The approximate dimensions of the press are:

Capacity             Number                 Length             Width             Height

 

Cubic Feet          of Plates                 Feet                  Feet                Feet

 

    10                         21                        11’                       3’                   5’-6"

    15                         31                        14’                       3’                   5’-6"

    20                         41                        17’                       3’                   5’-6"

 

A polypropylene air operated diaphragm pump capable of 30 gallons per minute at 60 psig is available. The CPVC piping from the filter to the pump and tank is not included, but will be specified for you.

 

1000 mm Filter Press

 

Filter plates are 1000mm (39") square polypropylene that have a 1 1/4" cake cavity with a capacity of 0.828 cubic feet per chamber. Slurry feed is through the center of the plate, and filtrate is discharged at the four corners of the plate. Filter cloth is polypropylene monofilament rated at 3 CFM. Closure is by a 30" stroke x 10" bore hydraulic cylinder with a capacity of 80 tons. The hydraulic power unit is air driven.

The press framework is fabricated of 1" steel plate, and the closure plates are reinforced with 1" steel ribs. After fabrication, the press is epoxy painted.

The approximate dimensions of the press are:

Capacity             Number                 Length             Width             Height

 

Cubic Feet          of Plates                 Feet                  Feet                Feet

 

    20                          25                         14’-6"                 4'                    6'

    30                          37                         17’                      4'                    6'

    40                          49                         19’-6"                 4'                     6'

A polypropylene air operated diaphragm pump capable of 30 gallons per minute at 60 psig is available. The CPVC piping from the filter to the pump and tank is not included, but will be specified for you.

Copyright 2010 by GTI Engineering |Register|Login